Kohler Courage SV730 Service Manual

12
Specifi cations
KohlerEngines.com 32 690 01 Rev. G
CLEARANCE SPECIFICATIONS
3
SV710
SV810
SV715 SV720
SV820
SV725 SV730
SV830
SV735 SV740
SV840
Valves and Valve Tappets
Clearance 0.101/0.152 mm (0.004/0.006 in.)
Valve Tappet to Crankcase Running Clearance 0.013/0.073 mm (0.0005/0.0029 in.)
Intake Valve Stem-to-Valve Guide Running Clearance 0.038/0.076 mm (0.0015/0.0030 in.)
Exhaust Valve Stem-to-Valve Guide Running Clearance 0.050/0.088 mm (0.0020/0.0035 in.)
Intake Valve Guide I.D.
New
Max. Wear Limit
7.038/7.058 mm (0.2771/0.2779 in.)
7.134 mm (0.2809 in.)
Exhaust Valve Guide I.D.
New
Max. Wear Limit
7.038/7.058 mm (0.2771/0.2779 in.)
7.159 mm (0.2819 in.)
Valve Guide Reamer Size
Standard
0.25 mm O.S.
7.048 mm (0.2775 in.)
7.298 mm (0.2873 in.)
Intake Valve Minimum Lift 8.07 mm (0.3177 in.)
Exhaust Valve Minimum Lift 8.07 mm (0.3177 in.)
Nominal Valve Face Angle 45°

Kohler Courage SV730 Specifications

General

Compression Ratio	8.5:1
Cooling System	Air-cooled
Fuel System	Carburetor
Ignition System	Electronic
Starter	Electric
Engine Type	4-cycle, overhead valve (OHV)
Displacement	725 cc
Oil Capacity	2.0 U.S. quarts
Lubrication	Full Pressure
Weight	85 lbs
Bore	3.27 in. (83 mm)
Stroke	2.64 inches