Kohler GM35950 User Manual

Replacement Kohler
®
GM35950
MPAC 500 ATS CONTROL
(FS Part No. 72-GM35950-00)
FLIGHT SYSTEMS
207 Hempt Rd. Mechanicsburg, PA 17050 Ph: 717-590-7330 www.flightsystems.com
TECHNICAL SUPPORT
Technical support is available by phone, fax or the internet for this and all Flight Systems products.
Phone: 717-590-7330 (8:00am - 4:30pm ET, M-F)
Fax: 717-590-7327 Web: http://www.flightsystems.com/tech_sppt.htm
• See reverse for list of AT commands to adjust settings and other details
Designed & Built in USA by
• Improved power supply for increased efciency and reduced noise.
• Improved standby power supply to decrease temperatures and extend the life of the board as well
as prevent loss of exercise cycle.
• Automotive grade microcontroller with extended temperature range and improved oscillator to
prevent intermittent resets, loss of exercise cycle, and drift.
• Serial interface with AT command set to adjust parameters. No special software required.
• Our replacement is also compatible with the I2C accessory board GM39650
• Conformal coating applied to reduce risk of moisture/corrosion damage.
• Made in USA; 2-Year Warranty

Kohler GM35950 Specifications

General

Brand	Kohler
Model	GM35950
Category	Controller
Language	English

Summary

Product Features and Specifications

Improved Power Supply

Enhances efficiency and reduces noise in the power supply for increased performance.

Extended Standby Power

Reduces temperatures and extends board life by improving standby power supply.

Automotive Grade Microcontroller

Features an automotive-grade microcontroller for extended temperature range and stability.

Serial Interface with AT Commands

Allows parameter adjustment via serial interface using AT commands, no special software needed.

I2C Accessory Board Compatibility

Replacement is compatible with the GM39650 I2C accessory board for enhanced functionality.

Conformal Coating Protection

Conformal coating applied to protect against moisture and corrosion damage.

US Manufacturing and Warranty

Product is manufactured in the USA and includes a 2-year warranty for customer assurance.

Technical Support Information

Contact and Support Channels

Provides phone, fax, and web details for technical support and product inquiries.

Support Availability

Technical support is available Monday to Friday, 8:00 AM to 4:30 PM ET.

AT Command Settings Adjustment

AT Command Set Usage

Instructions on using AT commands via serial port to adjust ATS control parameters.

Engine Start Delay (ATES)

Adjusts the engine start delay parameter from 1-10 seconds; default is 3 seconds.

Exercise Cycle Delay (ATED)

Sets the exercise cycle delay from 168-672 hours; default is 168 hours.

Frequency and Voltage Adjustments

Configures frequency dropout/pull-in percentages and voltage pull-in/dropout percentages.

Command Functions

Commands to apply changes, reset to factory defaults, read hardware, and read software settings.

Warranty and Service Policies

Limited Warranty Coverage

Covers repair/replacement of defective products for two years; excludes installation costs or consequential damage.

Return Policy Details

Unwanted items can be returned within 30 days with a restocking fee; shipping charges are non-refundable.

Rebuilding Service Information

Offers rebuilding for out-of-warranty products with a one-year warranty; contact for pricing.