1. Prepare the Site
NOTE: The open position of the supply stop handles must not
extend more than 4-1/2″ (11.4 cm) from the finished wall.
Install the 3/8″ water supply lines and 1-1/4″ drain piping
according to the roughing-in information.
Install wood backing behind the finished wall to provide a secure
material for the anchoring devices. The combined thickness of the
wood backing and the finished wall material must be a minimum
of 1-1/2″ (3.8 cm).
Complete the finished wall.
K-2362-4 K-2362-8 K-2362-1
A 4" (10.2 cm) 8" (20.3 cm) Single Hole
A
2-5/8"
(6.7 cm)
18-7/8"
(47.9 cm)
8-1/8"
(20.6 cm)
1/2" (1.3 cm) D. Mounting
Hole in Pedestal
2-1/4"
(5.7 cm)
6" (15.2 cm)
11-1/2"
(29.2 cm)
9"
(22.9 cm)
7-11/16"
(19.5 cm)
1/2" (1.3 cm) D.
Anchor Holes in
Lavatory
4" (10.2 cm)
1-1/4" (3.2 cm)
OD
Finished
Wall
34-1/2"
(87.6 cm)
22-3/4" (57.8 cm)
3/8" Cold
3/8" Hot
Finished Floor
Kohler Co. 3 1020683-2-E
To Next Page
Loading...
