Kohler K-4709 Installation Guide

Install the Remote Control Holder (cont.)
Install the caps to cover the screws.
Position the remote control into the holder with the user preset
icons facing up.
Install Using Double-Sided Tape
Remove the paper from one side of each of the tape squares.
Install a tape square in each of the rectangular areas located on
the back of the remote control holder.
NOTE: Before mounting the remote control holder, verify the
rectangular indent is toward the bottom.
Remove the paper from the tape squares.
Press the remote control holder into place.
Position the remote control into the holder with the user preset
icons facing up.
1054180-2-F 10 Kohler Co.

Kohler K-4709 Specifications

General

Brand	Kohler
Model	K-4709
Category	Bathroom Fixtures
Language	English