Servicing the Bidet Wand and Deodorizer
Cleaning the Bidet Wand
NOTE: Use a soft bristle brush to clean the bidet wand.
On the remote control, hold down the ″Wand″ icon until the wand extends out.
Clean the wand with a wet soft bristle brush and appropriate cleaner.
Press and hold down the ″Wand″ icon again or the ″Stop″ icon to retract the wand.
Cleaning or Replacing the Deodorizer
Unplug the power cord from the outlet.
Turn off the water by closing the water supply stop.
Remove the filter cover.
Remove the filter and inspect it for damage.
If the filter is damaged, replace it.
If the filter is clogged, remove all debris.
Install the filter.
Install the cover.
Open the supply stop.
Plug the power cord into the outlet.
1226974-5-A 14 Kohler Co.
To Next Page
Loading...
Need help?
General
