Kohler KDI 3404 TM - Page 88

7
88
_04
D1
R
1
7
9
5
3
2
8
10
6
4
Fig. 7.41
Q
18
17
6
5
4
3
2
1
16
15
14
13
12
7
8
9
11 10
Fig. 7.40
ED0053030410
INFORMATION FOR DISASSEMBLY
Important
• The capscrews R must be replaced every time they are
disassembled.
• Do NOT remove the capscrews completely, first loosen them
by turning them a whole cycle following the order shown in
the figure.
1 - Loosen fastening screws R, turning them by one turn
following the order shown in the gure.
2 - Undo capscrews R by following the order indicated in the
figure.
3 - Remove the lower semi-crankcase D1 and store it in a
suitable container for washing.
7.12.3 Lower semi-crankcase
Important
• The capscrews Q must be replaced every time they are
disassembled.
• Do NOT remove the capscrews completely, first loosen them
by turning them a whole cycle following the order shown in
the figure.
1 - Loosen fastening screws Q, turning them by one turn
following the order shown in the gure.
2 -
Undo capscrews Q by following the order indicated in the
figure.