TP-6694 2/25 143
6.1.10 Prime Power Switch Kit
The prime power switch kit prevents battery drain during generator set no -operation periods and when the generator set battery
cannot be maintained by an AC battery charger. See Figure 84 for an illustration of the kit and Figure 85 for the electrical
connections.
Stop the generator set using the stopping procedures in respective operation manual before placing the generator set in the
prime power mode. Move the prime power switch located on the junction box to the DOWN position. The controller including the
digital display, LEDs, and alarm horn does not function when the generator set is in the prime power mode.
Move the prime power switch located on the junction box to the UP position. The generator set is now ready for starting.
Figure 84 Prime Power Switch
Figure 85 Prime Power Switch Connections
To Next Page
Loading...