Kohler KG180 - Engine Metering

64 TP-6694 2/25
Overview (Fixed Display)
The battery charger displays appear only if the CAN-enabled 10 amp charger GM87448 has been connected. Charger displays
will show N/A if the charger is connected and then removed.
2.7.3 Engine Metering
Displays engine operating data as measured by the engine and other sensors.
Note:
Some displays are engine dependent, refer to the Appendix titled: Controller Displays from the Engine ECM.
Engine Metering
Overview - - >
##.# hr
### V ##.# Hz
### A #### kW
###_F ###%
### PSI ##.# V
###_ C ##.# %
#.# MPa ##.# V
CHG1: ##.#V
##.# A
CHG1: ##.#V
##.# A
English Display
Measurements - >
Metric Display
Measurements - >
With 10 Amp Charger
GM87448 Only
(N/A if no charger) - >
Engine - - >
Metering
Eng Speed:
# R/min
Oil Pres:
# PSI
Coolnt Temp:
### F
Fuel Level:
#%
Battery:
##.# V
Fuel Pressure:
## PSI
Diesel Powered Models
(requires fuel tank
sensor) - - >
Engine Dependent (see
NOTE above) - - >