Kohler KT726 - Clearance Specifications

17
Specications
32 690 03 Rev. N KohlerEngines.com
TORQUE SPECIFICATIONS
3,5
KT600
KT610
KT620
KT715
KT725
KT730
KT735 KT740
KT720
KT722
KT724
KT726 KT745
Oil Pan
Fastener 24.4 N·m (216 in. lb.)
Oil Pump
Screw (no torque sequence) 9.9 N·m (88 in. lb.)
Oil Sentry
™
Pressure Switch 4.5 N·m (40 in. lb.)
Solenoid (Starter)
Mounting Hardware 4.0-6.0 N·m (35-53 in. lb.)
Nut, Positive (+) Brush Lead 8.0-11.0 N·m (71-97 in. lb.)
Speed Control Bracket
Fastener 10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
Starter Assembly
Thru Bolt
Inertia Drive
Solenoid Shift
4.5-5.7 N·m (40-50 in. lb.)
5.6-9.0 N·m (49-79 in. lb.)
Mounting Screw 23.8 N·m (211 in. lb.)
Brush Holder Mounting Screw 2.5-3.3 N·m (22-29 in. lb.)
Stator
Mounting Screw 8.8 N·m (78 in. lb.)
Valve Cover
Stamped Steel Cover Fastener 13.6 N·m (120 in. lb.)
Plastic Cover Fastener
Hex Flange
Pan Head
9.0 N·m (80 in. lb.)
6.2 N·m (55 in. lb.)
CLEARANCE SPECIFICATIONS
3
KT600
KT610
KT620
KT715
KT725
KT730
KT735 KT740
KT720
KT722
KT724
KT726 KT745
Camshaft
End Play 0.06/0.40 mm (0.0024/0.0157 in.)
Running Clearance 0.040/0.077 mm (0.0016/0.0030 in.)
Bore I.D.
New
Max. Wear Limit
20.000/20.025 mm (0.7874/0.7884 in.)
20.038 mm (0.7889 in.)
Bearing Surface O.D.
New
Max. Wear Limit
19.948/19.960 mm (0.7854/0.7858 in.)
19.945 mm (0.7852 in.)
3
Values are in Metric units. Values in parentheses are English equivalents.
5
Lubricate threads with engine oil prior to assembly.