Kohler MasterShower K-74

Questions and Answers

V
vpetersonAug 4, 2025
What to do if my Kohler Bathroom Fixtures have no flow?
- T
  tracibarkerAug 4, 2025
  If your Kohler Bathroom Fixtures have no flow, there might be several reasons: * The water supply may not be turned on. In this case, turn on the water supply. * The water filter may be blocked. If so, clear the water filter (not supplied). * The strainer screen may be plugged. If this is the case, clean or replace the strainer screen. * In case of a pressure switch malfunction, contact your dealer.
L
Larry SchneiderAug 12, 2025
Why is there poor flow to other outlets in my Kohler Bathroom Fixtures?
- R
  rebekahrogersAug 12, 2025
  If you're experiencing poor flow to other outlets in your Kohler Bathroom Fixtures, consider the following: * A blocked water filter could be the culprit. Clear the water filter (not supplied). * Low water pressure can also cause this issue. Ensure you provide a minimum static water pressure of 40 p.s.i. (2.8kg/cm²). * A plugged strainer screen might be the problem. Clean or replace the strainer screen to resolve this.
C
Charles KellerAug 19, 2025
What to do if Kohler Bathroom Fixtures flow to showerhead only?
- M
  michaelbarrettAug 19, 2025
  If your Kohler Bathroom Fixtures only flow to the showerhead, it could be due to a few reasons: * There might be no power to the unit. Turn on the power at the circuit breaker. * In case of a transformer or solenoid malfunction, contact your dealer.
J
Justin HaleAug 27, 2025
Why is there poor flow to sheetflow in my Kohler Bathroom Fixtures?
- J
  Jessica SanchezAug 27, 2025
  If you have poor flow to the sheetflow in your Kohler Bathroom Fixtures, here's what you can check: 1. A blocked water filter can restrict flow. Clear the water filter (not supplied). 2. Low water pressure can be a factor. Ensure a minimum static water pressure of 40 p.s.i. (2.8kg/cm²). 3. Too many outlets selected can impact sheetflow performance. Sheetflow performance is optimum when only sheetflow is selected. 4. A plugged strainer screen can also cause poor flow. Clean or replace the strainer screen.