Tools and Materials
Breathing Protection 100% Silicone Sealant
Plus:
• Woodworking Tools and Materials
• 2x4s or 2x6s
• Drop Cloth
• Plastic Film (Optional)
•
Cement or Mortar (Optional)
•
Construction Adhesive (Optional)
•
Water-Resistant Wallboard
Before You Begin
CAUTION: Risk of product damage. The bath must be supported by the feet
or base. If the base is uneven, use shims under the base to level the bath. Do
not support the bath by the rim.
IMPORTANT! To ensure a successful installation, install the bath on a level oor.
NOTICE: Provide adequate oor support. Refer to the specication sheet for oor
load requirements.
NOTICE: A tiling-in bead should be installed if the nished wall material will come
into contact with any top surface of the bath. The tiling-in bead prevents water from
seeping behind the wall.
Kohler Co. 3
1420039-2-A
To Next Page
Loading...
