What to do if Kolibri Security Sensors unit does not read the bills or fails to detect counterfeit?
If your Kolibri Security Sensors unit isn't reading bills or detecting counterfeits, turn off the unit, open the lid, and gently clean the interior sensors with an air duster or soft brush. Then, close the lid tightly and turn the unit back on.
What to do if bills are jammed in Kolibri Security Sensors?
If bills are jammed in your Kolibri Security Sensors, turn off the unit and open the lid. Clean the interior sensors using an air duster or a soft brush. Also, check for any foreign objects like paper clips or rubber bands inside the unit and remove them.
What to do if Kolibri Security Sensors unit motor/rollers keep turning?
If the motor or rollers in your Kolibri Security Sensors unit keep turning, make sure the lid is properly closed. Then, turn the unit off and back on.
How to fix UV SUSPECT issue on Kolibri Security Sensors?
If you're getting a 'UV SUSPECT' message on your Kolibri Security Sensors, it means a suspect bill with UV characteristics has been detected. Before rejecting the bill, try passing it through the detector at least three times in different orientations.
What to do if my Kolibri Security Sensors unit does not turn on?
If your Kolibri Security Sensors unit doesn't turn on, first ensure the power cord is properly connected. Then, press and hold the POWER button for 3 seconds until the unit beeps.
General| Brand | Kolibri |
|---|---|
| Model | KCD-2000 |
| Category | Security Sensors |
| Language | English |
Overview of the Kolibri KCD-2000 4-way counterfeit detector and its capabilities.
Essential safety precautions for operating the KCD-2000 to prevent hazards.
Lists the items included in the KCD-2000 package.
Technical details and physical characteristics of the KCD-2000 counterfeit detector.
Diagrams illustrating the different parts and views of the KCD-2000 unit.
Explanation of the elements displayed on the KCD-2000's home screen.
Step-by-step guide on how to connect and turn on the KCD-2000.
Advice on preparing bills and avoiding damage to the detector's sensors.
Instructions on how to correctly insert bills into the 4-way detector for scanning.
How to change and understand the bill ejection direction for the KCD-2000.
Description of the Value Mode, showing bill denomination and total count.
Explanation of the Pass/Fail Mode for simple counterfeit detection results.
How to access and interpret the detailed report of counted bills.
Guide to navigating the KCD-2000's menu for settings and options.
Instructions for cleaning and maintaining the KCD-2000 to ensure optimal performance.
Solutions for common error messages and operational problems with the KCD-2000.
Information regarding the warranty coverage and terms for the KCD-2000.
How to contact Kolibri technical support for assistance and inquiries.
To Next Page
