.
OPERATION
DETAILED CONTROLS AND GAUGES
EMERGENCY ESCAPE HAMMER
CAUTION
If it is necessary to break the window glass with the hammer, be extremely careful not to injure yourself on the flying pieces
of broken glass.
To prevent injury, remove the broken pieces of glass remaining in the frame before escaping through the window. Be careful
also not to slip on the broken pieces of glass.
If it should become impossible to open the cab door for any reason,
and it is necessary to make an emergency escape from the
operator's compartment, use hammer (A) to escape.
To escape from the operator's cab, use hammer (A) to break the
glass and escape through the window.
DOOR LOCK
WARNING
Before the releasing the door lock, always stop the machine on flat ground.
Never release the door lock on a slope. The door may suddenly close and cause injury.
When releasing the door lock, do not extend your body or hands outside the machine and do not put your hands on the door
frame. The door may suddenly close and cause injury.
Use the door lock to fix the door in position after opening it.
1.
Push the door against catch (1) to lock it in position.
2.
When closing the door, push down the lever (2) on the left of
the operator's seat to release the catch.
3.
When attaching the door in position, lock it firmly to the catch.
3 - 85
To Next Page
Loading...
