.
OPERATION
OPERATION
OPERATION
OPERATION
4. Set the work equipment lock lever (3) in the LOCK position.
CHECK AFTER STOPPING ENGINE
Use the meters and caution lamps to check the engine coolant
temperature, engine oil pressure, fuel level, and Power train oil
temperature.
CHECK AFTER FINISHING WORK
1. Walk around the machine and check the work equipment,machine exterior, and undercarriage, also check for
any leakage of oil or coolant. If any problem are found, repair them.
2.
Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4.
Remove any mud affixed to the undercarriage.
3 - 110
To Next Page
Loading...
Need help?
General
