Komatsu PC88MR-10 User Manual

ATTACHMENTS AND OPTIONS
kk
WARNING
• Read the instruction manual for the attachment and the sections of this manual related to attach-
ments and options.
• Installing any attachment or optional equipment is related to the safety issue. Contact your Komat-
su distributor before installing.
• Installing attachments or optional equipment without consulting your Komatsu distributor may not
only cause problems with safety, but may also have an adverse effect on the operation of the ma-
chine and the life of the equipment.
• Any personal injuries, product failures, physical loss or damage resulting from the use of unauthor-
ized attachments or parts will not be the responsibility of Komatsu.
INSTALL ATTACHMENT
kk
WARNING
Depending on the type or combination of work equipment, there is a danger that the work equipment
may hit the cab or machine body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of
interference, and operate it with care.
Table of the combination of attachments which can be installed to the short arm
and long arm
○: Can be used
△: Can be used only for light duty work
x: Cannot be used
NOTICE
• When the long arm is equipped, if the bucket is drawn to the machine body, the arm interferes with
the body. Operate the long arm carefully.
• When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
Categories of use
Select a proper attachment for each use.
For general digging: Digging or loading sand, gravel, clay etc.
For light duty digging: Digging or loading dry and loose earth and sand, mud etc.
For loading: Loading of dry and loose earth
REMARK
For digging or loading hard soil or soft rock, the reinforced bucket having high durability and wear and abrasion
resistance is recommended.
Model
Tooth
mounting
pin
Capacity
SAE/CECE
Opening
width
(Body)
Opening
width
(Side cut-
ter)
Use Short arm Long arm
Narrow bucket Vertical 0.09/0.08 350 450
Narrow dig-
ging
○ ○
ATTACHMENTS AND OPTIONS ATTACHMENTS AND OPTIONS
6-34
WENAM00042

Komatsu PC88MR-10 Specifications

General

Brand	Komatsu
Model	PC88MR-10
Category	Excavators
Language	English