Playing on the Micro Player™
1. Remove the battery cover located on the back of the console.
2. Insert 4 AA batteries (not included) and replace the battery cover.
3. If you do not want to use batteries, gently insert the Micro-USB end of a Micro-USB cable (not included) into the
power port (5V IN) located on the back of the console. Gently insert the other end of the cable into a powered USB
port. When using this option you do not need to add batteries.
4. Press the on/o button.
5. Once the menu appears, press the START button.
6. For 1 player: select “Single Player” and press START. Once the menu appears, insert a credit using the COIN
button and press START to begin.
For 2 players: follow instructions in section titled “2-Player CO/VS™”.
NOTES:
• You must enter at least 1 credit using the COIN button before you can begin the game.
• High score does not save after the device has been turned o.
2-Player CO/VS™
NOTE: CO/VS™ only functions when you have 2 Contra Micro Players™ using the included CO/VS™ cable.
1. Gently insert one end of the included CO/VS™ cable securely into the CO/VS™ port on the back of one of the
Micro Players™. Gently insert the other end of the cable securely into the back of the second Micro Player™.
2. Follow instructions for section titled “Playing on the Micro Player™”.
3. On one of the Micro Players™, select “PLAY AS Player 1” and press the START button.
4. On the second, Micro Player™ select “PLAY AS Player 2” and press START.
NOTE: You must first select “PLAY AS Player 1” on one Micro Player™ before selecting “PLAY AS Player 2” on
the other.
5. Insert at least 2 credits using the COIN button and press the START button again to begin.
NOTES:
• You must select “PLAY AS Player 1” first before selecting “PLAY AS Player 2” when playing with 2 players.
• You must enter at least 2 credits before you can begin a 2-Player game.
• The game will not begin until you press START once credits have been added.
• Check to make sure CO/VS™ cable is completely inserted into both Micro Player™ devices.
• AA batteries (not included) or Micro-USB cable (not included) must be used to power the devices when playing
with 2 players.
• Both players must progress to move forward on the screen. Once a player loses a life, the game will continue until
the other player has lost a life.
• If one player interrupts their CO/VS™ connection during gameplay, please RESET or power o device and follow
the steps in “Playing on the Micro Player™” to restart gameplay.
1
2
3
4 5
6 7 8 9
10
11 12 13
14 15 16 17
18 19
20 21
22 23 24 25
26 27 28 29
30 31 32 33
34 35 36 37
38
39 40 41
42 43 44 45
46
47 48 49
50 51
52 53
54 55
To Next Page
Loading...
Need help?
General
