Need help?Do you have a question about the Konami Concerto Upright and is the answer not in the manual?
General| Type | Arcade Game Machine |
|---|---|
| Manufacturer | Konami |
| Model | Concerto Upright |
| Power Supply | AC 100V |
| Monitor | 29-inch |
Konami Gaming, Inc. offers 24/7 technical support.
Konami covers standard ground shipping for warranty items.
Details on warranty policy and Return Merchandise Authorization.
Information regarding compliance with FCC rules.
Overview of machine hardware and options.
Information on identifying the machine's unique serial number.
Describes installation and setup of the machine.
Details cabinet dimensions and weight.
Specifies operating conditions like voltage and humidity.
Guidance on unpacking and inspecting the machine.
Instructions for installing the signal tower candle.
Details on the drop box switch and its operation.
Information on SAS communication and connections.
Procedures for opening and closing various machine doors.
Instructions for installing and changing locks.
Information on bill acceptor types and settings.
Steps for powering up the machine.
Describes names and functions of the main parts.
Details part removal, installation, and parts manual.
Lists tools needed for maintenance.
Table of frequently used hardware parts.
Explains switch harness terminal positions for correct connection.
Procedures for removing and installing the main deck door switch.
Procedures for removing and installing the logic unit switch.
Procedures for removing and installing the key switch.
Procedures for removing and installing the display door switch.
Procedures for removing and installing the sub door switch.
Procedures for removing and installing the bill validator switch.
Instructions for removing and installing the power supply.
Instructions for removing and installing the main processing unit.
Instructions for removing and installing the logic unit.
Instructions for removing and installing the backplane board.
Instructions for removing and installing the bill validator.
Procedures for removing and installing the belly plex.
Procedures for removing and installing the printer assembly.
Procedures for removing and installing the meter assembly.
Instructions for removing and installing the power distribution assembly.
Instructions for removing and installing the LCD unit.
Refers to manual no. 810204 for troubleshooting procedures.
Refers to manual no. 810205 for preventive maintenance.
This section contains the wiring diagrams for the Concerto Upright.
Definitions of technical terms used in the manual.
Alphabetical listing of topics and their corresponding page numbers.
Specific cabinet assemblies and wiring diagrams for VLT Quebec builds.
To Next Page
