Konami Silent Scope - User Manual

Questions and Answers

T
tsmithAug 18, 2025
What to do if Konami Arcade Game Machines have no image on main screen and title unit fluorescent light failure?
- W
  William MillerAug 19, 2025
  If there is no image on the main screen and the title unit fluorescent light fails to light up, it may be due to: * No power supply - Turn ON the main power switch and check the store’s circuit breaker. * The power cord being unplugged - Reconnect the power cord. * The back door being open or poorly closed - Close the back door tightly with screws, as the door switch is activated to cut off power.
W
Walter PhillipsAug 20, 2025
Why is there no sound, or sound too weak/loud on Konami Silent Scope?
- V
  velasquezjaniceAug 20, 2025
  If there is no sound, or the sound is too weak or too loud, it could be due to: * Sound level maladjustment - Make new settings on the 'SOUND OPTIONS' screen. * Disconnected wires (connectors) on the PCB unit - Check to see if PCB unit wires (connectors) are all connected.
C
Carolyn OdonnellAug 23, 2025
What to do if Konami Silent Scope start button is malfunctioning?
- M
  Monique PittsAug 23, 2025
  If the start button is malfunctioning, the issue might be: * Disconnected switch wires from the start button socket - Reconnect the switch wires properly to the socket. * Disconnected wires (connectors) on the PCB unit - Check to see if PCB unit wires (connectors) are all connected. * A defective start button - Replace the start button as required.
C
Carrie SellersAug 26, 2025
What to do if Konami Silent Scope Arcade Game Machines rifle unit orientation cursor fails to move?
- D
  Diane KellyAug 26, 2025
  If the rifle unit orientation cursor fails to move or is out of position, consider the following: * Reference settings greatly out of spec - Check performance on 'I/O CHECK' screen. Make new settings on 'GUN CHECK' screen as required. * Wires disconnected from the rifle unit’s potentiometer - Reconnect the potentiometer wires properly. * The rifle unit’s potentiometer wrongly installed - Install the potentiometer properly. * A defective rifle unit’s potentiometer - Replace the potentiometer with a new one.
M
Mary BrownAug 27, 2025
What to do if Konami Silent Scope rifle unit’s trigger is malfunctioning?
- H
  hineschristopherAug 28, 2025
  If the rifle unit’s trigger is malfunctioning, it could be due to: * Wires disconnected from the trigger’s microswitch - Reconnect the microswitch wires properly. * Wires (connectors) disconnected on PCB unit - Check to see if PCB unit wires (connectors) are all connected. * A defective trigger’s microswitch - Check performance on 'I/O CHECK' screen. Replace the trigger’s microswitch as required.
T
tracy35Aug 30, 2025
What to do if Konami Silent Scope Arcade Game Machines coin selector is malfunctioning?
- V
  victor62Aug 30, 2025
  If the coin selector is malfunctioning, it may be due to a defective coin selector. Check performance on the 'I/O CHECK' screen and replace the coin selector or microswitch as required.
S
Sharon JacksonSep 1, 2025
What to do if Konami Arcade Game Machines start button lamp failure to light up?
- J
  Jennifer NelsonSep 1, 2025
  If the start button is functioning, but the button lamp fails to light up, it may be because: * Lamp wires are disconnected from the start button socket, or wrongly connected - Reconnect the lamp wires properly to the socket. * The start button lamp (LED) is defective - Check performance on 'I/O CHECK' screen. Replace the start button as required.
Y
ysheaSep 3, 2025
How to fix dark or bright main monitor screen on Konami Arcade Game Machines?
- K
  Karla MartinSep 4, 2025
  If the main monitor screen is too dark or too bright, it may be due to a monitor maladjustment. Readjust the brightness on the main monitor screen using the monitor adjustment PCB.
S
Sean BlakeSep 6, 2025
What to do if Konami Silent Scope have no image on scope screen after game starts?
- L
  Laura LopezSep 6, 2025
  If the game has started, but there is no image on the scope screen, it could be due to: * Connectors wrongly connected after replacing the rifle unit or the scope - Reconnect the connector(s) properly. * Wires (connectors) disconnected on PCB unit - Check to see if PCB unit wires (connectors) are all connected.
J
Joshua GarciaSep 8, 2025
Why is the title unit fluorescent light failing on Konami Arcade Game Machines?
- L
  Lisa GallagherSep 8, 2025
  If the title unit fluorescent light fails to light up, it may be because: * The fluorescent light or glow lamp is broken - Replace the fluorescent light and glow lamp with same-type ones. * Connectors are wrongly connected when joining the separated units - Reconnect the connector(s) properly.

Summary

Precautions for Use

General Safety Guidelines

Covers WARNING/CAUTION definitions, safety symbols, and roles of qualified personnel.

Setup and Environment Safety

Covers safe placement, environmental conditions, and warnings against improper setup.

Safe Operation and Handling

Covers safe practices during game play, power cord handling, and electrical precautions.

Moving, Transportation, and Disposal Safety

Covers safe procedures for moving, transporting, and disposing of the machine.

Warning and Safety Labels

Locations and Types of Labels

Details the various warning and safety labels applied to the machine and their meanings.

Specifications

Machine Dimensions and Weight

Provides physical specifications like height, width, depth, and weight of the main unit and components.

Technical Specifications and Conditions

Covers power consumption, monitor type, and recommended operating environment.

Installation Allowances

Details necessary space for carrying in and installing the product, including clearance requirements.

Parts Identification

Major Component Identification

Identifies main parts of the game machine, rifle unit, and power unit with diagrams.

How to Play

Game Overview and Modes

Explains the game's premise, controls, objectives, and available play modes.

Doors and Access Panels

Maintenance Door Operation

Instructions for opening and closing the maintenance door for access.

Coin Door and Coin Box

Instructions for opening the coin door, removing the coin box, and locating the coin counter.

Monitor Adjustment Door

Instructions for opening and closing the monitor adjustment door.

Game Settings and Configuration

Checking Game Performance (Self-Test)

Procedure for verifying the machine's operational status and PCB check.

Setting Game Modes and Options

Details on accessing and adjusting various game modes, controls, and options.

Mode Descriptions and Options

Explains functionality of different game modes, sound options, and game options.

Coin Options and Bookkeeping

Configuration for coin mechanisms, free play settings, and financial tracking data.

Factory Settings Reset

Procedure for returning all settings to their original factory defaults.

Installation and Assembly

Machine Setup and Securing

Covers fastening adjusters to secure the machine and installing the step cover.

Unit Installation and Connections

Details installing the title unit, accessing the service panel, and the power unit.

Separating and Moving Components

Instructions for separating machine units and moving the coin counter.

Maintenance and Troubleshooting

Component Replacement Procedures

Covers replacement of coin selector, fluorescent light, start button, rifle unit, scope, and potentiometers.

PCB Unit and Circuit Protection

Details on removing the PCB unit and resetting the circuit protector.

Monitor and Scope Adjustments

Guides for adjusting monitor settings and scope LCD screen brightness.

Troubleshooting Common Issues

Lists common problems, their possible causes, and suggested measures for resolution.

Annex and Diagrams

Label Locations and Exploded Views

Shows label placements on the machine and provides detailed exploded diagrams of parts.

Wiring Diagrams

Provides comprehensive electrical wiring schematics for the machine.

Konami Silent Scope Specifications

General

Release Year	1999
Genre	Light Gun Shooter
Platform	Arcade
Developer	Konami
Players	1-2
Monitor	Raster, standard resolution
Display	Horizontal
Input	Light Gun
Cabinet	Upright