34
6 Installation and assembling
How to fasten the adjusters
•Adjust the adjusters so that the casters do not touch the floor.
Take care not to exceed the maximum adjusting height of the adjuster.
•Make all the 6 adjusters come in contact with the floor, tighten them with
hexagon nuts after making sure that all the units are placed stably in a
horizontal position.
6-1 Fastening the adjusters
Lift the caster about 5 mm
(0.2 in) from the floor.
Hexagon nut
Max.adjustable height:
70 mm (2.76 in)
Min. 65 mm (2.56 in)
To Next Page
Loading...
