44
7 Maintenance
How to replace the start button
•Before replacing the start button, be sure to turn OFF the main power
switch and unplug the power cord from the receptacle.
•When replacing parts, be sure to use parts of the correct specifications.
Never use parts other than the specified ones.
•Strictly refrain from disassembly and repair of parts which are not indicated
in this manual, as well as settings and remodelling.
7-3 Replacing the start button
1 Be sure to turn OFF the main power
switch and unplug the power cord
from the receptacle.
2 Remove the screws and datach the
cover.
3 Disconnect the connectors.
MEMO
•Be careful not to force the cover up
too far. The wires connected may be
damaged inside.
4 Remove the screw off the band that
secures the button and the socket.
5 Pull out the socket from the button.
To Next Page
Loading...
