24
5 Game settings
5-2 Setting and adjustment of game mode
Manually check and change the settings for the screen displays and game contents
and change them as reguired.
Starting the test mode
1 Turn ON the main power switch.
2 While the demonstration game is playing, press the test button on the service
panel. (Do not turn ON the main power switch with the test button held down.
The current settings as well as the BOOKKEEPING data will be erased and the
machine will have the factory settings.)
·The main menu is displayed on the screen.
Quit the manual test mode
1 Pull the rifle unit’s trigger to select “GAME MODE” on the main menu screen.
2 Press the start button.
·The screen goes back to the game mode.
Main menu screen (basic items)
Selecting each mode
How to select each mode from the main menu.
·SELECT --> Pull the rifle unit’s trigger.
·SET --> Press the start button.
After selecting a mode, refer to the page on which that mode is described in details.
I/O CHECK
GUN CHECK
SCREEN CHECK
SCOPE SCREEN ADJUST
COLOR CHECK
MASK ROM CHECK
C.G. BOARD CHECK
SOUND OPTIONS
GAME OPTIONS
COIN OPTIONS
BOOKKEEPING
ALL FACTORY SETTINGS
GAME MODE
MAIN MENU
PULL GUN TRIGGER = SELECT ITEM
PRESS START BUTTON = EXECUTE
Displaying the products destination and version.
Checking the controls.
-->Page25
Checking the performance of the rifle unit.
-->Page26
Adjusting the monitor screen distortion.
-->Page26
Adjusting the scope screen position.
-->Page27
Adjusting the display color.
-->Page27
Checking the content of the MASK ROM in PCB unit.
-->Page27
Checking the C.G. board performance.
-->Page28
Setting various sound options.
-->Page28
Setting vatious game options.
-->Page29
Setting various coin options.
-->Page30
Displaying the bookkeeping information of coins.
-->Page31
Returning all the settings to factory ones.
-->Page33
Returning to game mode.
* * *
VER 1.00
•If an error happens in “SCOPE SCREEN ADJUST DATA” or “GUN VOLUME
DATA” at the start of the machine, a triangular marker is displayed at the error
item. Pick up the item and make new settings. The “GAME MODE” item does
not appear until those settings are properly made. This means the game cannot
be played.
MEMO
To Next Page
Loading...
Need help?
General
