Kone V3F25 - Page 6

V3F25/18 drive
Installation Instruction
© 2004 KONE Corporation AM-11.65.020
All rights reserved. 6 (42) (E) 2004-01-08
LED indications on the HCB board
LED Normal Indicates
77:U Car is at the switch area.
61:N
61:U
77:N
77:S
INSP. DRIVE Driving mode.
NORMAL RUN Yellow
RELEVELLING
RED.SPEED
HALF SPEED
UP START Driving direction.
DOWN START
TPOL Green Tachometer polarity. LED lights when the motor is
rotating in up direction.
RPOL Green Resolver polarity. LED lights when the motor is
rotating in up direction.
MAIN CONT Main contactor enables command given by V
3
F.
BRAKE Drive gives brake open command.
SP. LIMIT Speed is under ADO speed limit. ADO speed
parameter (6_25).
PICKUP LED turns off to indicate deceleration point. LED is on
all other times.
RXD Yellow HCB board is receiving characters from LCE.
TXD HCB board is transmitting characters to LCE.
LBR MLB (Modulated Line Bridge) allows driving. On while
running. Off while stopped.
MC SUP Main contactor is active.
LBE HCB gives start command to MLB. Always off if no
MLB.
POWER Green Power is ON and HCB board is alive.