Kongsberg cNODE Micro - Page 2

4Connectthebatterychargertomains(110or220V AC).
Result
TheLEDindicatoronthechargerashesgreenwhencharging.Itnormallytakesabout30seconds
beforethechargingstartsandtheLEDindicatorstartsashinggreenafterconnectingthecNODE
batterychargertothemains.Thebatterywillbechargedwithin1hour.TheLEDindicatorwillstay
greenwhenfullycharged.
Turningonthetransponder
Thetransponderisdesignedforoperationinwateronly.Thetranspondermaybeoperatedinairfortest
purposesoverashortperiodoftime.
Prerequisites
Thetranspondermustbechargedbeforeuse.
Procedure
1GreasetheconnectorwithMolykote44Mediumorequivalent
grease.
2Connecttheon/offplugtotheendcapconnector.
3Tightenthelockingsleevetotheendcapconnector.
Result
Abuzzcanbeheardwithin25secondsasaconrmationthatthe
transponderisactivated.
Furtherrequirements
ItisrecommendedtotestthetransponderwiththeTestandCongurationunit(TTC)tomakesureit
isworkingproperlybeforeoperation.
Connectingthetranspondertoexternalpowerandrespondersignals
Prerequisites
Thetranspondermustbechargedbeforeuse.Thisisthepincongurationforamaleconnector,as
seentowardstheconnector(faceview).
450393/B/2023–January–30