Need help?Do you have a question about the Kongsberg HiPAP 352P and is the answer not in the manual?
General| Brand | Kongsberg |
|---|---|
| Model | HiPAP 352P |
| Category | Marine Equipment |
| Language | English |
Identifies the intended audience for this instruction manual.
Provides information on where to download documentation from the website.
Lists the registered trademarks relevant to the system.
Details the function and components of the acoustic transducer.
Describes the system's operator interface options.
Explains the function and connections of the interface unit.
Details the optional Responder Driver Unit for trigger signals.
Describes the optional repeater unit for signal amplification.
Covers procedures for accepting, unpacking, and storing the equipment.
Outlines the responsibilities for equipment during installation and commissioning.
Provides instructions for mounting the transducer on the vessel.
Details the procedure for mounting the repeater unit.
Explains how to install the Responder Driver Unit.
Describes the process of converting signal types.
Illustrates the cable connections between system units.
Details the types and connections of required cables.
Provides guidance on connecting system cables.
Details the connection of the Responder Driver Unit to the responder.
Outlines tasks for regular system maintenance.
Provides procedures for transducer inspection and cleaning.
Details the process for lubricating and connecting underwater connectors.
Explains how to create system backups for configuration.
Lists spare parts for the portable operator station.
Lists spare parts for the standard operator station.
Lists spare parts specific to the HiPAP 352P-H/5 models.
Lists spare parts for the HiPAP 352P-MGC-x models.
Lists spare parts for the HiPAP interface unit.
Lists spare parts for the repeater unit.
Lists spare parts for the Responder Driver Unit.
Details the functional and operational performance characteristics of the system.
Provides physical dimensions and weights of system components.
Summarizes the power requirements for the system components.
Lists the temperature, humidity, and vibration specifications.
Shows dimensional drawings for the computer unit.
Illustrates the installation method for the transducer.
Provides dimensional drawings for the HiPAP 352P-H/5.
Provides dimensional drawings for the HiPAP 352P-MGC-x.
Shows dimensional drawings for the interface unit.
Provides dimensional drawings for the repeater unit.
Shows dimensional drawings for the Responder Driver Unit.
Presents the wiring diagram for the converter.
To Next Page