Need help?Do you have a question about the Kongsberg HiPAP 502 and is the answer not in the manual?
General| Operating Frequency | 21-31 kHz |
|---|---|
| Transducer Diameter | 500 mm |
| Depth Rating | 6000 meters |
| Interfaces | Ethernet, Serial |
| Type | Hydroacoustic Positioning System |
The system is operated from a Windows-based computer running dedicated software.
Procedures for installing the computer in a KM1000 kit or 19" rack.
Procedure for mounting the transceiver unit on a bulkhead.
Procedures for connecting various HiPAP cables.
Information on ESD hazards and precautions for handling electronic components.
Tasks organized by frequency (after use, monthly, semi-annually).
Procedure for replacing a malfunctioning Ethernet switch.
Procedure for removing an LPT32 Transceiver board.
Procedure for removing the power module from the transceiver unit.
Procedures for replacing power module, fan unit, and terminal block.
Procedure for replacing a blown fuse in the transceiver unit.
Supported datagram formats and serial line speeds for data input.
To Next Page