Do you have a question about the Kongsberg TTC Series and is the answer not in the manual?
Category | Marine Equipment |
---|---|
Manufacturer | Kongsberg Maritime |
Power Supply | 24 VDC |
Control Modes | Manual, Automatic |
Communication Protocol | Ethernet |
Identifies the intended users for this system's manual.
Provides information on downloading documentation from the website.
Lists registered trademarks relevant to the system and software.
Details the essential components of the TTC unit: test transducer, serial line cable, and power cable.
Provides company name, address, phone, website, and email for technical support.
Details the procedure for safely opening and closing the TTC unit's case.
Explains how to connect the unit to AC power and charge its rechargeable battery.
Covers switching the unit on/off and its standby mode operation.
Explains the function of the control panel and its integrated PC for device management.
Details the physical controls, connectors, and ports on the TTC unit's control panel.
Describes the touch screen interface and its graphical user interface (GUI).
Explains the features and usage of the Acoustic Test tab for transponder diagnostics.
Details input fields and functions for performing acoustic tests on transponders.
Explains the Slant Range display and the Transponder Configuration tab features.
Details acoustic modes, reset procedures, product info, and diagnostics for transponders.
Step-by-step guide on how to safely replace the rechargeable battery of the TTC unit.
Instructions for replacing the TTC unit's control panel, including the integrated PC.
Details the preventive maintenance schedule, cleaning, and battery charging procedures.
Lists part names and numbers for TTC 30 and TTC 10 units.
Provides part details for test transducer, serial cable, power cable, and battery.
Lists the part name and number for the TTC 30 front panel spare part.
Details operating and storage temperature ranges, and ingress protection rating.
Summarizes operating frequencies for TTC30 (medium) and TTC10 (low).
Lists input voltage, battery type (Lead-acid), and battery runtime.
Presents the outline dimensions and drawings of the TTC unit.
Presents the outline dimensions and drawing of the test transducer.