To Next PageTo Next Page
Need help?Do you have a question about the Kongsberg EA440 and is the answer not in the manual?
General| Type | Single beam echo sounder |
|---|---|
| Frequencies | 38 kHz, 200 kHz |
| Application | dredging |
| Data Acquisition | Real-time data processing |
| Power Supply | 110-240 VAC, 50/60 Hz |
| Power Output | 1000 W RMS |
| Interface | Ethernet, RS-232 |
| Storage Temperature | -30°C to +70°C |
| Weight | 15 kg |
Explains the manual's aim and intended readers.
Lists resources for further info and registered trademarks.
Illustrates the basic EA440 system and its main parts.
Details on Operator Station and Wide Band Transceiver (WBT).
Information on available single-beam transducers.
Lists items included in a standard EA440 delivery.
Specifies voltage, current, and cable routing requirements.
Addresses potential compass interference and acoustic noise factors.
Outlines security measures when connecting to a network.
Overview of installation tasks and drawing requirements.
Lists necessary tools and materials for installation.
Recommendations for optimal transducer location.
Methods to minimize acoustic noise impact.
How to install the WBT using brackets or in a cabinet.
Guidelines for installing the Operator Station computer.
Procedures for mounting the WBT cabinet and its drawers.
Steps for designing and mounting the protective steel conduit.
Detailed steps for installing transducers on various hull types.
Overview of system cabling and a list of cables.
Guidance on connecting transducer, power, and Ethernet cables.
How to connect power, ground, and synchronization signals.
Details on system performance and supported data formats.
Specs for weight, power requirements, and operating conditions.
Guidelines for safe transportation and lifting of units.
Steps for inspecting units upon arrival and storing them.
Detailed steps for unpacking various system components.
