Need help?Do you have a question about the Kongsberg SIMRAD IS15 and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Manufacturer | Kongsberg SIMRAD |
| Type | Speed Log |
| Display Type | LCD |
| Outputs | NMEA 0183 |
| Screen Size | Unknown |
| Resolution | Unknown |
| Weight | Unknown |
Overview of a basic IS15 SDT-1 system configuration, including key components.
Lists the standard parts and accessories included with IS15 instrument systems.
Explains the instrument's buttons, display sections, and basic operation.
Explains the arrangement and navigation of the instrument's display screens.
Details the first screen group, covering depth, speed, and trip log data.
Explains how system-wide alarms are triggered and managed.
Explains the instrument's buttons, display sections, and basic operation.
Explains the arrangement and navigation of the instrument's display screens.
Details the first screen group, covering depth, alarms, and sounder settings.
Details the third screen group, covering apparent and true wind data.
Explains how system-wide alarms are triggered and managed.
Explains the compass display, scale, and LCD modes.
Explains how the compass displays heading, references, and status.
Details alarm messages specific to the compass and system failures.
Provides detailed technical specifications for Combi and Multi instruments.
Provides detailed technical specifications for the Compass and Transceiver.
Details the physical dimensions for various depth and speed/temperature transducers.
Provides an overview of the installation process for IS15 instruments.
Details how to properly mount the IS15 instrument head unit.
Illustrates system connection diagrams and details NMEA/Expander connectivity.
Guidance on routing, securing, and extending Roblink and NMEA cables.
Details on installing and connecting the IS15 Expander unit.
Steps for initial system setup and accessing the calibration menu.
Covers general settings like illumination and depth-related configurations.
Procedures for compass calibration, heading offset, and unit selection.
Detailed steps for the first-time setup of the compass instrument.
Troubleshoots issues with blank displays and communication problems.
Troubleshoots problems related to wind speed and angle displays.
Troubleshoots issues with speed, temperature, and heading data.
Troubleshoots issues with navigation data like waypoints and course over ground.
Basic cleaning and routine checks for IS15 instruments.
Steps for safely removing instruments and returning for service.
How to perform a local reset on an instrument before moving it.
To Next Page
