Name: Konica Minolta 7145
Brand: Konica Minolta
Rating: 4 (1 reviews)

To Next Page

To Previous Page

OTHER CONTROLS

2-37

II UNIT EXPLANATION

11. OTHER CONTROLS

11.1 Parts Energized When the Main Power Switch is OFF

The follwing components are powered regardless of whether the SW1 (Main power switch) is on or off,

provided that the power cord remains plugged in.

A. CBR 1 and CBR 2 (Circuit breakers/1 and /2)

The circuit breakers serve to protect internal components against damage from short circuit. If current

exceeds the specified value, the circuit breaker(s) will go off, cutting the power to the system.

B. NF (Noise filter)

This filter reduces noises that enter through the power line.

C. DCPS (DC power source)

This supplies power to each unit, and also controls the ON/OFF state of the fixing heater lamp.

SW1

DCPS

AC(H)

AC(N)

CBR1

CBR2

Other manuals for Konica Minolta 7145

Questions and Answers:

Need help?

Do you have a question about the Konica Minolta 7145 and is the answer not in the manual?

General