3.6 Details of quality adjustment items
3
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-32
3.6.5 Registering the adjusted value of the density balance in the machine
You can register the measured data (adjusted value of the density balance) saved in the USB memory or the
computer on the network in the machine.
. Registering the measured data saved in the USB memory
1 On the control panel of the main body, press Utility/Counter.
The [UTILITY] screen is displayed.
2 Press [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Quality Adjustment] - [Density
Balance Adjustment] in sequence.
Place to save measured
data
Operation
Measured data saved in
the USB memory
Connect the USB memory device and register the data using the control
panel of the main body.
Refer to ". Registering the measured data saved in the USB memory".
Measured data saved in
the computer on the net
-
work
Send (upload) the measured data using Web Utilities from the Web browser
and then register the data.
Refer to ". Registering the measured data saved in the computer on the
network".
To Next Page
Loading...
Need help?
General
