AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 2-43
2.5 How to Operate the Both Sides Adj. Item
2
2.5.8 Back Side Fine Adjustment
This adjustment is useful when you want to adjust the magnification and position of the image on the back
side based on the output result of the job data that is actually going to be used.
1 Output approximately three sheets of the job data that is actually going to be used from the tray to
which "Both Sides Adj." is applied.
2 Press [Paper Setting] on the [MACHINE] screen.
3 Select the tray to which the job data is output, and press [Change Set].
To Next Page
Loading...
Need help?
General
