Konica Minolta AeroDR System User Manual

4.1 LED display of respective devices
102
4.1.13 AeroDR Access Point
Cannot be used
with this device
Cannot be used
with this device
PoE (umber)
STATE
(green/red)
CLIENT (green)
FAULT (red)
WLAN (umber)
BRIDGE (green)
SIGNAL (green)
LED
Lighting color Lighting pattern Status
PoE Umber On Power is being supplied.
FAULT Red Flashing Error is occurring.
STATE
Green/
Red
Green/on Lights when operation preparation is completed.
Red/on Error is occurring.
SIGNAL Green On Signal strength of wireless. (Only in client mode)
BRIDGE Green On Operating in bridge mode.
CLIENT Green On Operating in client mode.
WLAN Umber On Operating in wireless LAN mode. (Normal)

Konica Minolta AeroDR System Specifications

General

Type	Digital Radiography System
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Image Acquisition Time	Less than 5 seconds
Data Output	DICOM 3.0
Wireless Communication	IEEE 802.11a/n
Detector Size	14" x 17" (35 cm x 43 cm)
Grayscale	65536
Exposure Latitude	Wide
Operating Temperature	10°C to 40°C (50°F to 104°F)
Power Supply	Rechargeable Lithium-ion Battery or AC Adapter
Humidity Range	30% to 85% RH (non-condensing)