What does SECURE PRINT IS NOT AVAILABLE mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays 'SECURE PRINT IS NOT AVAILABLE', it means the expanded memory unit is not installed, so the 'Secure Print' setting cannot be used. The job is cancelled.
What to do if Konica Minolta bizhub 211 says NOT ACCEPTED PASSWORD?
If your Konica Minolta All in One Printer says 'NOT ACCEPTED PASSWORD', it means the secure print password you entered is incorrect, and the document cannot be printed. Type in the correct password.
Why are there streaks in my Konica Minolta bizhub 211 All in One Printer copies?
Streaks in copies from your Konica Minolta All in One Printer can occur for several reasons: * If you're copying a thin double-sided document, the information on the back might be showing through. In this case, press the [Density] key and select a lighter density setting. * The original glass may be dirty. Wipe it with a soft, dry cloth. * The document pad may be dirty. Clean it with a soft cloth dampened with a mild detergent. * If the original document is printed on highly translucent material, place a blank sheet of paper on top of the document.
How to fix a Konica Minolta bizhub 211 All in One Printer copy that is too light?
If your Konica Minolta All in One Printer is producing copies that are too light, it could be due to the copy density setting or the paper being used. * Check the copy density: Press the [Density] key and select a darker copy density. * Check the paper: If the paper is damp, replace it with new paper.
What to do if Konica Minolta All in One Printer shows COMMUNICATION ERROR (####) (PRESS ANY KEY)?
If you see a COMMUNICATION ERROR, it could be due to a problem with the machine or the recipient/caller's fax machine. Press any key to check the details of the error in the printed transmission or reception report. Then, check the communication settings, and try communicating again.
What to do if Konica Minolta All in One Printer displays MEM.FULL/RX CANCEL?
If the Konica Minolta All in One Printer displays 'MEM.FULL/RX CANCEL', it means that when receiving e-mail, the size of the image data exceeded the capacity of the memory. To solve this, retrieve the reception data stored in the memory.
How to fix 'MEMORY NEAR FULL' error on Konica Minolta All in One Printer?
The 'MEMORY NEAR FULL' error means the image data from your computer exceeds the printer's memory capacity. Press any key. Then, turn the printer off and on again.
Why is 'SECURE PRINT IS NOT AVAILABLE' on my Konica Minolta All in One Printer?
Since the expanded memory unit is not installed, the “Secure Print” setting cannot be selected, and the job is cancelled.
Why the start key indicator does not light up on Konica Minolta All in One Printer?
If the indicator on the [Start] key of your Konica Minolta All in One Printer does not light up, ensure the account number is entered according to the procedure described in 'Entering the account number'.
How to troubleshoot Konica Minolta All in One Printer that cannot be turned on?
If your Konica Minolta All in One Printer won't turn on: * Check if the power supply cord has been unplugged from the electrical outlet and plug it in. * See if the breaker for the electrical circuit has been tripped and close it.
General| Print Speed | 21 ppm |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 21 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Monthly Duty Cycle | 15, 000 pages |
| Connectivity | USB 2.0 |
| Printing Technology | Laser |
| Max Paper Size | A3 |
| Memory | 32 MB |
| Functions | Print, Copy, Scan |
| Original Size | A3 |
| Type | Monochrome |
| Zoom Range | 25-400% in 1% increments |
To Next Page
