How to fix paper jam on Konica Minolta All in One Printer?
If a paper jam has occurred in your Konica Minolta All in One Printer, open the cover at the displayed position and remove the jammed paper. If jammed paper is left, open the cover again and remove it.
What to do if Konica Minolta All in One Printer says toner empty?
If your Konica Minolta All in One Printer displays '[TONER EMPTY SUPPLY TON- ER]', this means the toner is depleted. Install a new toner bottle to resolve this issue.
How to load paper in Konica Minolta All in One Printer when paper empty message appears?
When your Konica Minolta All in One Printer shows '[PAPER EMPTY LOAD PA- PER(#XXX)]', it means the selected tray is out of paper. Load paper of the displayed size into the indicated tray to continue printing.
What to do if my Konica Minolta All in One Printer displays machine trouble service call?
If your Konica Minolta All in One Printer displays '[MACHINE TROUBLE SERVICE CALL (CXXXX)]', turn off the main power switch, and then turn it on again. If the error continues, it indicates an issue that may require professional attention.
What to do if Konica Minolta All in One Printer says front cover open?
If your Konica Minolta All in One Printer shows '[FRONT COVER OPEN CLOSE FRONT COVER]', it means the front cover is open or not securely closed. Make sure to securely close the front cover of the printer.
What to do if Konica Minolta All in One Printer displays no suitable paper error?
If your Konica Minolta All in One Printer displays '[NO SUITABLE PAPER LOAD PAPER(#XXX)]', it indicates that the paper size of the selected tray was changed during copying. Load paper of the displayed size, or press Paper to select another paper size.
How to clear document jam in Konica Minolta All in One Printer?
If you encounter '[Original doc. jam Open doc.feed cover]' on your Konica Minolta All in One Printer, it means there is a paper jam inside the ADF (Automatic Document Feeder). Open the cover at the displayed position and remove the jammed paper.
Why does my Konica Minolta All in One Printer say paper size error?
If your Konica Minolta All in One Printer displays '[PAPER SIZE ERROR RESET PAPER(#XXX)]', the paper loaded in the tray does not match the specified size. Remove the loaded paper and load paper according to the correct procedure.
How to set original to ADF on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays '[SET ORIGINAL TO ADF]', and you're using the ADF for copying, ensure the original is loaded into the ADF and that the ADF is securely closed.
What does remove original in ADF mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays '[REMOVE ORIGINAL IN ADF]', and you're using the Original Glass for copying, it means an original document is left in the ADF. Remove the original from the ADF.
General| Print Speed | 22 ppm |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 22 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Paper Size | A3, A4, A5, B4, B5 |
| Memory | 128 MB |
| Connectivity | USB, Ethernet |
| Functions | Print, Copy, Scan |
| Warm-up Time | 15 seconds |
| First Print Time | 6.5 seconds |
| Scan Destinations | Email, FTP, SMB, USB |
| Operating System Compatibility | Windows, Mac |
| Weight | 28.2 kg |
To Next Page
