Fax Specifications
Item Specifications
Scanline density
Ultra-high resolution mode
:
High resolution mode:
Standard mode:
Main scanner 600 dots/inch × sub scanner 600
dots/inch, or main scanner 16 dots/mm × sub
scanner 15.4 lines/mm
*1
Main scanner 8 dots/mm × sub scanner 7.7
lines/mm
*1
Main scanner 8 dots/mm × sub scanner 3.85
lines/mm
*1
Data transmission speed 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, 2400 bps (Automatic selection)
Supported line type Input phone line
Electronic transmission
speed
Between 2 and 3 seconds (33600 bps)
*2
Image encoding method MH/MR/MMR/JBIG
Communication is not possible with machines not equipped with this mode.*1
This is the time when you transmit *2 Letter documents with approx. 700 characters in normal
mode (8 dots/mm × 3.85 lines/mm) via Super G3 (based on ITU-TV.34, 33,600 bps). This is the
electronic transmission speed only for image information, excluding the transmission control
time. Note that the actual transmission speed depends on document contents, the other party's
machine model, and line status. It will be between 6 and 7 seconds for the communication
with G3 machines (when you transmit the same document in 14400bps).
Copy Specifications
Item Specifications
First copy time 6 seconds (at 68 °F room temperature, copy using the document glass,
Letter paper supplied from paper cassette 1)
Number of copies 1 to 99 sets
Continuous copying speed 25 pages/minute (Letter, using paper cassette 1)
To Next Page
Loading...
Need help?
General
