4
Additional copy operations
4-20 250/350
To set the “Sound Setting” function
It is possible to specify the volumes of the tone that is sounded when a touch
panel button is touched and of the alarm that is sounded when a malfunction
occurs.
0 The factory default setting is “Normal”.
1 Display the Accessibility Settings screen. (For details, refer to
page 4-15.)
2 Touch [Sound Setting].
The Sound Setting screen appears.
3 Touch [Normal] or [Loud].
4 Touch [Enter].
The Accessibility Settings screen appears again.
2
Note
The volume of the tone produced when a control panel key is pressed or
when an alarm is sounded can also be changed from the Utility mode. For
details, refer to “Tone volume parameters” on page 11-22.
To Next Page
Loading...
General
