Konica Minolta bizhub 3300P User Manual

User's Guide
- 28 -
Accessing the controller board
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
1. Open the controller board access door.
2. Use the following illustration to locate the appropriate connector.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.

Konica Minolta bizhub 3300P Specifications

General

Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	50, 000 pages
Memory	256 MB
Warm-up Time	Less than 30 seconds
Type	Monochrome Laser Printer
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	33 ppm (A4)
Connectivity	USB 2.0, Ethernet
Paper Capacity	250 sheets
First Page Out Time	6.5 seconds or less