bizhub 501/421/361 (Version 2) 8-7
Application functions
8
1 Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
– For an original that exceeds 80 pages, refer to "Scanning the original in separate batches ("Separate
Scan" setting)" on page 3-11.
2 Load the paper for the cover pages and the paper for the main body of the original into separate paper
trays.
– Use paper with the same size for the cover pages and for the main body of the original, and load
them in the same orientation.
3 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– For details on using thick paper for the cover sheets and on loading the paper, refer to "Paper
weight" on page 7-4 and "Loading paper into the bypass tray" on page 2-57.
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Sheet/Cover/Chapter Insert screen appears.
4 Touch [Cover Sheet].
The Cover Sheet screen appears.
To Next Page
Loading...
Need help?
General
