8
Application functions
8-14 bizhub 501/421/361 (Version 2)
3 Touch [Insert Image].
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Insert Image" function, touch [No].
The Insert Image screen appears.
4 Using the keypad, specify the pages where the image is to be inserted.
– There are two Insert Image screens. Touch and to display a different screen.
– The inserted original is added after the specified page.
– To arrange the page numbers in order, starting with the lowest number, touch [Sort].
– To remove a page number that has been specified, touch the button for the page to be removed,
and then press the [C] (clear) key.
– If the original scanned from the original glass has more pages than the number of pages specified
in the Insert Image screen, the extra pages of the insertion original are printed at the end of the
original.
– If the original scanned from the original glass has fewer pages than the number of pages specified
in the Insert Image screen, the missing insertion pages are not printed.
– Even if the same page number is specified twice, one insertion original page is added at the
specified location.
– If the specified page number is greater than the total number of pages in the main original, the
corresponding insertion original page is added at the end of the original copy.
5 Touch [OK], and then touch [OK] in the next screen that appears.
6 Specify any other desired copy settings.
7 Using the keypad, type in the desired number of copies.
To Next Page
Loading...
Need help?
General
