8
Application functions
8-54 bizhub 501/421/361 (Version 2)
4 Touch buttons under "Date Format", "Time Format" and "Pages" to specify the various settings.
– To cancel the "Date/Time" function, touch [No].
– To print the date/time only on the first page, touch [1st Page Only].
– The stamp will not be printed on blank pages inserted using the "Cover Sheet", "Insert Sheet" and
"Chapters" functions.
?
Can the time be omitted?
% If "None" is selected, the time is not printed.
5 Touch [Print Position].
The Print Position screen appears.
6 Select the printing position, and then touch [OK].
– As the factory default, [Top Left] is selected.
– To make fine adjustments to the printing position, touch [Adjust Position]. Select the desired
direction under "Left & Right Adjustment" or "Top & Bottom Adjustment", touch [´] to switch
between the integer and the fraction, touch [–] and [+] to specify the adjustment amount, and then
touch [OK].
– If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to
type in the adjustment amount. For details on switching between decimal and fraction values, refer
to "System Settings" on page 12-18.
To Next Page
Loading...
Need help?
General
