Konica Minolta BIZHUB 368 User Manual

Security Function Ver. 1.01 Feb. 2017 10. Firmware rewriting
41
9. On the Language Select screen, select a language to be displayed on the LCD area of
the control panel, then touch [Fix].
NOTE
• The language selected on this screen is displayed on the Language Selection
screen of Utility.
• Up to 9 languages are selectable. However, Japanese and English are essential
options.
10. Touch [OK] to go back to the firmware update selection screen.
11. Touch [START]. (At this time, the Start key starts blinking red.)
12. Check that the control panel shows the message indicating that the data has been
rewritten correctly ([Downloading Completed]). (The Start key lights blue.)
13. Turn OFF the main power switch.
14. Remove the USB memory.
15. Turn ON the main power switch.
16. Call the Service Mode to the screen.
17. Select [Firmware Version].
18. Make sure if the version of firmware is updated.
A9HJS1E022DA

Konica Minolta BIZHUB 368 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black & White)	Up to 36 ppm
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Speed (Black & White)	Up to 36 cpm
Copier Resolution	600 x 600 dpi
Duplex Printing	Yes
Network Connectivity	Yes
Monthly Duty Cycle	150, 000 pages
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Type	All-in-One Printer
Maximum Paper Size	11 x 17"
Connectivity	USB, Ethernet
Weight	56 kg