bizhub 658e/558e/458e/368e/308e 3-35
3.3 Fax function
3
3.3 Fax function
3.3.1 Required settings and basic operations
This section describes the settings required to send and receive a fax via a telephone line as well as the basic
operations.
- To use the Fax function, the optional Fax Kit is required.
Preparation flow
The following describes a preparation flow to send a fax. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line. For details, refer to page 3-36.
2 Registering transmission information (Administrator)
% Specify the name and fax number to be displayed as a sender when sending a fax from this ma-
chine. For details, refer to page 3-36.
3 Selecting the dialing method (Administrator)
% Select the dialing method to suit your environment. For details, refer to page 3-38.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-39.
1 Load the Original
2 Entering a destination
% Enter the destination fax number, and check the settings such as the image quality.
3 Press the Start key.
% Press the Start key to send the original.
To Next Page
Loading...
Need help?
General
