Need help?Do you have a question about the Konica Minolta bizhub 1250 and is the answer not in the manual?
General| Category | Printer |
|---|---|
| Type | Multifunction Printer |
| Printing Technology | Laser |
| Print Speed | 125 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Connectivity | USB, Ethernet |
| Network Connectivity | Yes |
| Hard Drive | 250 GB |
| Maximum Paper Size | SRA3 |
| Operating Systems Supported | Windows, Linux |
Defines the machine's intended purpose and supported digital printing systems.
Identifies target operators and administrators for the guide.
States the manual's scope and conformity to specific models.
Details the physical components and layout of the Saddle Stitcher SD-513.
Highlights critical safety warnings and cautions for operation.
Lists optional units that expand machine functionality.
Details available paper weights, exit tray capacity, and paper sizes.
Explains the machine's screen display for the installed Saddle Stitcher SD-513.
Guides on how to replenish the staple cartridge when empty.
Explains how to empty the trim scrap box for fore-edge trimming.
Details how to empty the slit scrap box after slitting operations.
Introduces fundamental operations like Fold & Staple and Multi Half-Fold.
Details optional units: Creaser CR-101, Trimmer TU-503, Folding Unit FD-504.
Guides on booklet making with Fold & Staple and Multi Half-Fold functions.
Introduces the function of folding sheets into three using Multi Tri-Fold.
Explains adding fold lines (creases) using the Creaser Unit CR-101.
Explains adding a single crease to the cover for fold & staple/multi half-fold.
Describes adding creases for multi tri-folded paper using Creaser Unit CR-101.
Introduces the 2-side slitting function of the Trimmer Unit TU-503.
Describes 2-side slitting combined with fold & staple or multi half-fold.
Introduces 2-side slitting for multi tri-folded paper.
Explains forming spine corners using the Folding Unit FD-504.
Details manual operations for Folding Unit FD-503 or Saddle Stitcher SD-513.
Guides on making perfect-bound booklets using the Perfect Binder PB-503.
Details driver settings for PS Plug-in, PPD (Windows/Mac), and PCL drivers.
Describes Prior Print and Sample Print functions in job operations.
Describes tray settings, especially for 2-side slit covers.
Adjusts staple center position for 2 and 4 position staples.
Adjusts width of adjustment plates for half-folded or tri-folded sheets.
Adjusts staple pitch for 2 and 4 position staples.
Adjusts tri-fold positions for sheets.
Adjusts alignment plate positions for single and multi folds.
Adjusts the half-folded position of sheets.
Adjusts width of plates for misaligned half or tri-folded sheets.
Adjusts the fore-edge trimming width.
Adjusts parallelism between trim line and fore edge.
Adjusts 2-side slitting width for rough cut and curve.
Adjusts crease position for half-fold, tri-fold, and perfect bind covers.
Adjusts the force for forming the spine of saddle-stitched booklets.
Adjusts roller motion for forming the spine of booklets.
Adjusts staple position to reduce misalignment.
Adjusts staple strength to change the staple foot shape.
Adjusts 2-side slitting speed to reduce rough cut and curve.
Manages trimmer receiver settings like count select and moving pitch.
Addresses mishandled paper errors and precautions for removal.
Provides tips for common issues with trimming and slitting functions.
Guides on cleaning the conveyance belt for optimal print quality.
Lists typical specifications for the Saddle Stitcher SD-513 and its options.
To Next Page