Saddle Stitcher SD-513 5-55
5.18 [Saddle Stitcher Adjustment] - [Trimmer Receiver Adjustment]
5
5.18.3 Forcibly Move
The trimmer receiver of Saddle Stitcher SD-513 is forcibly moved 1 pitch.
NOTICE
The [Trimmer Receiver Adjustment] key is displayed only in the customer engineer setting mode. Contact your
service representative, if desired.
1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2 Display the Forcibly Move Screen for trimmer receiver.
% In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjust-
ment], [17 Trimmer Receiver Adjustment], and [03 Forcibly Move] in sequence.
% In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle
Stitcher Adjustment], and [17 Trimmer Receiver Adj.] in sequence.
% In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment],
and [17 Trimmer Receiver Adj.] in sequence.
3 Press [Start].
% In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Execute
Compulsive Movement].
4 Press [Return] to restore the Trimmer Receiver Adjustment Menu Screen.
To Next Page
Loading...
Need help?
General
