Konica Minolta bizhub 1250 User Manual

4-30 Saddle Stitcher SD-513
Adding Fold Lines (Creases) on Paper
4
4.5
4.5 Adding Fold Lines (Creases) on Paper
4.5.1 Functional Overview
Fold lines (creases) can be added on sheets when the machine uses Creaser Unit CR-101 equipped in Sad-
dle Stitcher SD-513.
Select The Number of Creases (1 piece, 2 pieces, 3 pieces, or 4 pieces), and set crease positions.
For the convex crease side, select front or back.
NOTICE
The number of creases is affected by the copy settings used in combination.
When Fold & Staple or Multi Half Fold mode is selected, only a single crease can be specified for cover sheets.
Creases cannot be added on body. See page 4-36 for details.
When Tri Fold mode is selected, only two creases can be specified for tri-folded sheets. See page 4-42 for
details.
When Perfect Bind mode is selected, 2 creases or 4 creases can be specified for cover sheets. Creases can-
not be added on body. See page 4-68 for details.

Konica Minolta bizhub 1250 Specifications

General

Category	Printer
Type	Multifunction Printer
Printing Technology	Laser
Print Speed	125 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Network Connectivity	Yes
Hard Drive	250 GB
Maximum Paper Size	SRA3
Operating Systems Supported	Windows, Linux