8-4 Saddle Stitcher SD-513
Typical Specifications
8
8.1
8.1.2 Creaser Unit CR-101 (equipped in Saddle Stitcher SD-513)
Name CR-101
Type Creaser unit for crease blade driving
Function Crease Adds creases (fold lines) on sheets.
Through pass Outputs sheets to the finishing device without processing.
Crease Number of creases 1 to 4 pieces
However, the following rules are provided depending on which func-
tion is combined with the Crease function.
• Fold & Staple / Half-Fold + Crease: 1 piece
• Tri-Fold + Crease: 2 pieces
• Perfect Binding + Crease: 2 or 4 pieces (with gutter fold lines)
• Crease only: 1 to 4 pieces
Paper size Standard:
A3 w, B4 w, A4 w, B5 w, Foolscap, SRA3 w, SRA4 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w
Custom:
min. 4.72" e 10.12" to max. 13.03" e 19.21" (min. 120 mm e 257 mm
to max. 331 mm e 488 mm)
Wide paper
Paper weight 21 to 93 lb Bond (80 g/m
2
to 350 g/m
2
)
However, the maximum weight conforms to the specifications of the
combined functions.
Crease position
standard
Inlet edge stopper (Output edge side of main body)
Setting unit 0.1 mm
Min. line interval 1.0 mm
Through
pass
Paper size Standard:
A3 w, B4 w, A4 w, B5 w, Foolscap, SRA3 w, SRA4 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w
Custom:
min. 4.72" e 10.12" to max. 13.03" e 19.21" (min. 120 mm e 257 mm
to max. 331 mm e 488 mm)
Wide paper
Paper weight 11 to 93 lb Bond (40 g/m
2
to 350 g/m
2
)
Size 8.31" (W) e 18.11" (D) e 5.39" (H) (211 (W) e 460 (D) e 137 (H) mm)
Weight 14.99 lb (6.8 kg)
Power supply DC 5/24 V (Supplied from Saddle Stitcher SD-513)
Power consumption 25 W or less
To Next Page
Loading...
Need help?
General
