Konica Minolta bizhub 1250 User Manual

Saddle Stitcher SD-513 4-19
4.2 Additional Functions of Saddle Stitcher SD-513
4
4.2.4 Folding Unit FD-504
Spine corner forming for fold & stapled sets is available by using Folding Unit FD-504 with Saddle Stitcher
SD-513. Also use Trimmer Unit TU-503 as an application function in combination to form spine corners on
fold & stapled sets that have come through 2-side slitting operation.
Spine corner forming is available only in combination with fold & staple.
Option Key Operation Description and Illustration
Spine Corner Forming +
Fold & Staple (+ Fore-
edge Trimming)
[Fold&Staple]
[Fold & Staple Set-
ting] [Spine Corner
Forming] to be set to
[ON]
Use Booklet as an application function in combina-
tion, and form spine corners on fold & stapled sets.
For [Spine Corner Forming Strength], select
[Strong+], [Strong], [Normal], [Weak], or [Weak+].

Konica Minolta bizhub 1250 Specifications

General

Category	Printer
Type	Multifunction Printer
Printing Technology	Laser
Print Speed	125 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Network Connectivity	Yes
Hard Drive	250 GB
Maximum Paper Size	SRA3
Operating Systems Supported	Windows, Linux