How to fix Konica Minolta bizhub 751 All in One Printer driver installation failure?
If the printer driver installation fails for your Konica Minolta All in One Printer, especially in Windows Vista, it might have already been partially installed as a Web Service-supporting printer. In Windows Vista, uninstall the printer in the Network window, and then reinstall it.
What to do if the message "misfeed detected" appears on Konica Minolta All in One Printer?
If the message "misfeed detected" appears, remove the paper according to the guide or illustration provided.
How to clear a paper misfeed in tray 1 of Konica Minolta bizhub 751 All in One Printer?
To clear a paper misfeed in tray 1: - Remove any misfed paper. - Lift up the paper take-up roller, and then remove any paper remaining in the tray. - Load the paper into the tray again, lower the paper take-up roller, and then close the tray.
How to clear a paper misfeed in tray 2 of Konica Minolta bizhub 751 All in One Printer?
To clear a paper misfeed in tray 2: - Remove any misfed paper. - Lift up the paper take-up roller, and then remove any paper remaining in the tray. - Load the paper into the tray again, lower the paper take-up roller, and then close the tray.
Why is my Konica Minolta All in One Printer failing to send faxes to certain numbers?
If you're having trouble sending faxes, make sure the recipient's fax number and address are correct. Also, verify that any one-touch or program addresses are registered accurately. Incorrectly registered addresses can cause issues. You can print an address book list to check the registered numbers.
Why images are not printed properly on Konica Minolta All in One Printer?
If images are not printed properly by your Konica Minolta All in One Printer, it may be due to insufficient available computer memory space. Try simplifying the images to reduce the data size.
Why the pages are not punched on Konica Minolta bizhub 751?
If the pages are not punched by your Konica Minolta All in One Printer, printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting.
How to solve the issue when Konica Minolta bizhub 751 All in One Printer cannot print even though "Public User" is selected for user authentication?
If your Konica Minolta All in One Printer is not printing correctly even though "Public User" is selected for user authentication, printing as a public user may not be permitted on the main system. Check with the administrator to see if printing as a public user is permitted.
Why jobs in Save in User Box disappeared in Konica Minolta bizhub 751 All in One Printer?
If jobs in Save in User Box have disappeared from your Konica Minolta All in One Printer, it's possible that the main system is set to automatically delete jobs in the user box. Check the settings for the user box on the main system.
What to do if Konica Minolta All in One Printer paper is not fed from the specified paper source?
If your Konica Minolta All in One Printer is not feeding paper from the specified source, it may be because the paper source is loaded with paper of a different size or orientation. Load the paper source with paper of the appropriate size and orientation.
General| Monthly Duty Cycle | 300, 000 pages |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Printing Technology | Laser |
| Duplex Printing | Standard |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 100 sheets |
| Scanning Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Print Speed | 75 ppm |
| Scan Speed | 75 opm (originals per minute) |
| Connectivity | Ethernet, USB |
| Zoom Range | 25% - 400% |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page
