bizhub 754e/654e 2-79
2.15 Setting time/date in machine
2
2.15 Setting time/date in machine
When access to the machine by the administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the time-of-day and date. Use of the network time protocol (NTP)
server allows the current time/date to be adjusted automatically.
NOTICE
If the NTP server is to be used, make sure that the NTP server is a correct one and take necessary action to
protect communications between the NTP server and the machine.
2.15.1 Setting time/date
<From the Control Panel>
0 For the procedure to call the System Settings screen on the display, see steps 1 and 2 of page 2-28.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1 Call the System Settings screen on the display from the control panel.
2 Touch [Date/Time Settings]
3 Select the item to be set. Then, touch [C] and next set the time-of-day and date.
Touching [Set Date] lets the NTP server to adjust the current time/date automatically.
% Touch [Display Keypad] to display the keypad.
% If [Set Date] is to be used for the setting, set the time difference from the coordinated universal time
(UTC) using [Time Zone].
% [Set Date] can be used if the NTP server is registered. For more details, make settings of step 5 and
onward.
4 Touch [OK].
To Next Page
Loading...
Need help?
General
