What to do if my Konica Minolta BIZHUB C20 says 'Connect error! Change to off-line edit mode'?
This error appears when the USB cable is disconnected during USB connection or the user machine is turned OFF. To solve this, ensure the USB cable is securely connected and the user machine is powered ON.
What to do if media is mis-fed in the ADF of Konica Minolta All in One Printer?
If the Konica Minolta All in One Printer is mis-feeding media in the ADF, ensure that the loaded document meets the specifications. Avoid exceeding the maximum capacity. Slide the document guides against the edges of the document.
How to fix if several sheets go through Konica Minolta All in One Printer together?
To resolve the issue of multiple sheets going through your Konica Minolta All in One Printer at once, ensure the front edges of the media are even by removing and evening them up before reloading. Replace moist media with dry media. Avoid fanning transparencies to prevent static electricity.
Why is my Konica Minolta All in One Printer mis-feeding?
If your Konica Minolta All in One Printer is mis-feeding media, first, remove the misfed media and reposition the media properly in the tray. Ensure that you are not exceeding the maximum allowed number of sheets. Adjust the media guides in Tray 1 to match the media size. Avoid using warped or wrinkled media. If the media is moist, replace it with dry media. Special media like envelopes or labels should only be loaded in Tray 1. Load transparencies or labels according to the manufacturer’s instructions.
What to do if media misfeed message stays on for Konica Minolta All in One Printer?
If the Konica Minolta All in One Printer displays a media misfeed message, try opening and closing the front cover again to reset the machine. Also, ensure that you have removed all misfed media from the media path.
How do I fix 'Error opening USB Port!' on my Konica Minolta BIZHUB C20?
The 'Error opening USB Port!' message on your Konica Minolta All in One Printer means that the specified USB port cannot be used for the computer in use. Select a different USB port that is compatible with the computer.
What to do if Konica Minolta BIZHUB C20 All in One Printer displays 'Invalid password : must be within 0000 to 9999!'?
If your Konica Minolta All in One Printer shows 'Invalid password : must be within 0000 to 9999!', it means the password you entered is not correct. Enter a valid password within the range of 0000 to 9999.
What should I do if my Konica Minolta All in One Printer says 'Password is not correct!'?
If your Konica Minolta All in One Printer displays 'Password is not correct!', it indicates that the password entered in the “Administrator” section of “Utility Setting” is incorrect. Re-enter the correct password for the Administrator in Utility Setting.
What to do if my Konica Minolta All in One Printer displays 'Connect Fail!'?
If your Konica Minolta All in One Printer shows 'Connect Fail!', it means the remote connection has failed. You should check the network settings and retry the connection.
General| Brand | Konica Minolta |
|---|---|
| Model | BIZHUB C20 |
| Category | All in One Printer |
| Language | English |
To Next Page
